Judul : From Megabit Copper to Gigabit Fiber
link : From Megabit Copper to Gigabit Fiber
From Megabit Copper to Gigabit Fiber
Author: John SheplerYou know it's time to increase your WAN bandwidth. There are two main forces that make this necessary. First, the load on network connections is constantly increasing. Second, carriers are phasing out legacy buyer services that have worked so well for decades. Now is the time to switch to gigabit fiber.
What drives the need for innovation?Information technology is a different animal than it was in the past. If you have been involved in technology for many years, you probably remember the days when computers, their peripherals and software were all in the home. Connections to the outside world were used for communication between settlements and the Internet. When there weren't a lot of resources to access from the outside, there wasn't a need for a lot of bandwidth.
Everything has changed. The entire IT architecture has been turned upside down. Currently, there is very little in-house development, and there is an urgent need for massive connectivity to the cloud, where computing, storage and software reside. The Internet has evolved from a simple messaging system to an almost infinitely deep resource for all disciplines. Internet communication is much more demanding due to the high concentration of large files and high-definition video.
Small businesses also need what used to be considered extremely high bandwidth. Medium and large businesses cannot live without high-speed fiber optic bandwidth.
Why do copper connections disappear?
Until a few years ago, twisted-pair copper cables connected to telephone company headquarters were considered the standard speed for both voice and data. This is before the switch from land lines to POTS (Plain Old Telephone Service). The replacement is VoIP telephony that runs on the same computer network that connects desktop computers, network storage, printers and servers. A home telephone exchange, called a PBX, suffered the same fate as most internal servers. He moves towards the cloud.
Another use of these twisted pairs was for 1.5 Mbps dedicated and point-to-point Internet connections. These T1 lines failed because speed demands long exceeded their capacity. The DS3 upgrade, provided with copper coaxial cables, covered most of the space, multiplexed over SONET fiber optic cable. Only the paving ring was copper.
With declining demand for copper telecommunications services, which are less frequently requested by businesses and too slow to support 4G LTE and 5G cell sites, telecom companies that have copper are either throwing it away for recycling or allowing it to corrode. It won't take long and you'll need to upgrade even if you don't need the extra bandwidth.
The new standard is the optical fiber Ethernet WAN.
Most telecommunications traffic today consists of Ethernet packets. Instead of changing the protocol to and from legacy telecommunications services, Ethernet over fiber is the new WAN standard.
Bandwidth is typically available from 10 Mbps on the low end to 10 Gbps on the high end, with 100 Gbps available in some key areas.
As with previous copper telecommunications solutions, you have the option of creating point-to-point private lines or dedicated Internet access. Both are compatible with Ethernet over fiber. Private lines offer dedicated bandwidth so you don't have to compete with other companies for line bandwidth. Dedicated Internet access also gives you exclusive access to your last mile connection. Of course, the Internet itself is a common medium.
What about affordability? Fiber optic lines are becoming almost everywhere these days. The exceptions are rural areas or remote commercial and industrial parks that do not yet have fiber service. Fiber performance can sometimes be achieved with broadband cabling solutions that can provide 1 Gbps total bandwidth at competitive prices. If you are in a remote location, you can often find commercial 4G LTE and 5G wireless solutions, many of which do not offer the best bandwidth, but are often a good solution to replace old copper lines.
Is your business running out of bandwidth or have you been alerted that your copper bandwidth options have been discontinued? If so, now is the perfect time to check the price and availability of Gigabit fiber bandwidth for your business.
That's the article From Megabit Copper to Gigabit Fiber
That's it for the article From Megabit Copper to Gigabit Fiber this time, hopefully can be useful for all of you. okay, see you in another article post.
You are now reading the article From Megabit Copper to Gigabit Fiber with link address https://direcway-satelite.blogspot.com/2022/08/from-megabit-copper-to-gigabit-fiber.html?m=0
0 Response to "From Megabit Copper to Gigabit Fiber"
Posting Komentar